POR-15 Reducer Solvent

POR-15 Reducer Low VOC Solvent is the best and most appropriate thinning solvent for reducing viscosity and cleaning up when painting with a spray gun or brushing on POR-15 solvent based coatings. This paint reducer thinner formula is of medium temperature speed.

Our POR-15 reducer paint works great when thinning all POR-15 Paints, Primers, and coatings like; POR-15 2k Urethane, POR-15 High Temp, Top Coat, and POR-15 Rust Preventive Coating. You can thin up to 5%-15% depending on coating formula when applying with a spray gun, brush, or roller with this POR1-15 solvent thinner substitute.

Compatible with

• POR-15 Rust Preventive Coating up to 5% maximum
• 2K Urethane Industrial Coating up to 15% maximum
• Top Coat up to 10% maximum
• High Temp up to 10% maximum
• High Build Primer up to 15% maximum
• Caliper Paint up to 5% maximum
• Engine Enamel up to 5% maximum

For solvent based urethane coatings only.
Not compatible with water-based coatings or lacquer. 

*Replaces POR-15 Solvent #40401 and #40404 products

WARNING: Cancer - www.P65Warnings.ca.gov.

POR-15 Reducer thins all POR-15 primers, paints, coatings, and all other manufacturer urethane based coatings. Always consult with the paint/coating manufacturer for maximum dilution tolerance. 

For Single component coatings: Pour paint/coating into a mixing cup. Slowly add POR-15 Reducer by 1% by volume at a time, and test for desired viscosity. Mix thoroughly. 

For 2K Coatings: Pour Part A and Part B in a mixing cup per manufacturer's mix ratio. Add POR-15 Reducer 1% by volume at a time, and test for desired viscosity. Mix thoroughly. Use with Urethane-based products. Do Not use with lacquer-based or waterbased products.

Compatible with

• POR-15 Rust Preventive Coating up to 5%
• 2K Urethane Industrial Coating up to 15%
• Top Coat up to 10%
• High Temp up to 5%
• High Build Primer up to 15%
• Caliper Paint up to 5%
• Engine Enamel up to 5%