POR-15 Reducer Solvent
Medium Speed Solvent
$12.85 -
$25.65
item(s): 40804
POR-15 Reducer Low VOC Solvent is the best and most appropriate thinning solvent for reducing viscosity and cleaning up when painting with a spray gun or brushing on POR-15 solvent based coatings. This paint reducer thinner formula is of medium temperature speed.
Our POR-15 reducer paint works great when thinning all POR-15 Paints, Primers, and coatings like; POR-15 2k Urethane, POR-15 High Temp, Top Coat, and POR-15 Rust Preventive Coating. You can thin up to 5%-15% depending on coating formula when applying with a spray gun, brush, or roller with this POR1-15 solvent thinner substitute.
Compatible with
- POR-15 Rust Preventive Coating up to 5% maximum
- 2K Urethane Industrial Coating up to 15% maximum
- Top Coat up to 10% maximum
- High Temp up to 10% maximum
- High Build Primer up to 15% maximum
- Caliper Paint up to 5% maximum
- Engine Enamel up to 5% maximum
For solvent based urethane coatings only.
Not compatible with water-based coatings or lacquer.
*Replaces POR-15 Solvent #40401 and #40404 products
California Code of Regulations prohibits the use of certain compounds in consumer products, including paint reducers: Methylene chloride, Trichloroethylene, Perchloroethylene, and Parachlorobenzotrifluoride. These chemicals are considered to have significant adverse health impacts, even though they may not be classified as Volatile Organic Compounds (VOCs) for compliance purposes.
As a result of these regulatory updates we will no longer be able to ship low voc reducer to CA.
WARNING: Cancer - www.P65Warnings.ca.gov.
POR-15 Reducer thins all POR-15 primers, paints, coatings, and all other manufacturer urethane based coatings. Always consult with the paint/coating manufacturer for maximum dilution tolerance.
For Single component coatings: Pour paint/coating into a mixing cup. Slowly add POR-15 Reducer by 1% by volume at a time, and test for desired viscosity. Mix thoroughly.
For 2K Coatings: Pour Part A and Part B in a mixing cup per manufacturer's mix ratio. Add POR-15 Reducer 1% by volume at a time, and test for desired viscosity. Mix thoroughly. Use with Urethane-based products. Do Not use with lacquer-based or waterbased products.
Compatible with
- POR-15 Rust Preventive Coating up to 5%
- 2K Urethane Industrial Coating up to 15%
- Top Coat up to 10%
- High Temp up to 5%
- High Build Primer up to 15%
- Caliper Paint up to 5%
- Engine Enamel up to 5%