Have a Question? ASK THE EXPERT

Free Shipping On All Orders $150+

0

Your Cart is Empty

By Category
  • Rust Preventive Coating

  • POR-15 Rubberized Undercoatings

    Bedliner & Undercoat

  • POR-15 Rust Remover Dissolving Bath Solution

    Rust Remover

  • High Temp Coatings

  • Patch & Putty

  • Preparation Products

  • POR-15 Topcoat Paints

    Topcoats

  • Car Detailing

  • Accessories

  • POR-15 Primers

    Primers

  • Fuel Tank Repair

  • Kits

  • By Use
  • Restoration

  • Maintenance

  • Resto-Mod

  • POR-15 Reducer Solvent

    Medium Speed Solvent

    item(s): 40816

    Size

    POR-15 Reducer Low VOC Solvent is the best and most appropriate thinning solvent for reducing viscosity and cleaning up when painting with a spray gun or brushing on POR-15 solvent based coatings. This paint reducer thinner formula is of medium temperature speed.

    Our POR-15 reducer paint works great when thinning all POR-15 Paints, Primers, and coatings like; POR-15 2k Urethane, POR-15 High Temp, Top Coat, and POR-15 Rust Preventive Coating. You can thin up to 5%-15% depending on coating formula when applying with a spray gun, brush, or roller with this POR1-15 solvent thinner substitute.

    Compatible with

    For solvent based urethane coatings only.
    Not compatible with water-based coatings or lacquer. 

    *Replaces POR-15 Solvent #40401 and #40404 products

    WARNING: Cancer - www.P65Warnings.ca.gov.

    Customer Reviews

    Based on 4 reviews
    100%
    (4)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    L
    Lia Kots
    Good

    Good one

    J
    Johnny Stewart
    POR-15 Chassis Paint

    The POR-15 gloss black chassis paint is a great product. It goes on smooth and has a beautiful shine.

    R
    Rufus Trunt
    You need this as well

    I found this very helpful when using the 2K paint. That stuff sets up pretty fast and can be quite thick. Adding a little of this in the mix helps is flow better.

    R
    Rick Puhek
    First time user

    This was the first time I used this product. So far it’s been an ease to use. Hope to use it some more.

    POR-15 Reducer thins all POR-15 primers, paints, coatings, and all other manufacturer urethane based coatings. Always consult with the paint/coating manufacturer for maximum dilution tolerance. 

    For Single component coatings: Pour paint/coating into a mixing cup. Slowly add POR-15 Reducer by 1% by volume at a time, and test for desired viscosity. Mix thoroughly. 

    For 2K Coatings: Pour Part A and Part B in a mixing cup per manufacturer's mix ratio. Add POR-15 Reducer 1% by volume at a time, and test for desired viscosity. Mix thoroughly. Use with Urethane-based products. Do Not use with lacquer-based or waterbased products.

    Compatible with

    • POR-15 Rust Preventive Coating up to 5%
    • 2K Urethane Industrial Coating up to 15%
    • Top Coat up to 10%
    • High Temp up to 5%
    • High Build Primer up to 15%
    • Caliper Paint up to 5%
    • Engine Enamel up to 5%