Have a question for our team?

ASK THE EXPERT

Engine Enamel

High Temperature Engine Paint

item(s): 42008

Color
Size

POR-15 Engine Enamel high temperature engine paint is formulated to be the finest engine paint available, with a richness and depth of color unsurpassed by any other paint of its type. The finest pigments and color ingredients have been used in sufficient quantities which mean more paint on your engine and less solvent dissipated into the atmosphere.

Our engine enamel paint flows easily, covers better than any other engine paint, and lasts longer. Our enamel paints are non-flammable and can easily handle temperatures up to 300°F without discoloring. POR-15 Engine Enamel conforms to even the strictest California environmental standards. We invite you to compare them with any other product and you'll see what we mean. We formulated Engine Enamel to be the best and most beautiful engine enamel you can buy.

Typically, a pint is enough for an entire engine.

Only Black and Chevy Orange are available in quarts


- POR-15 Engine Enamel Technical Data Sheet


Black
WARNING: Cancer - www.P65Warnings.ca.gov.

Ford Corporate Blue
WARNING: Cancer - www.P65Warnings.ca.gov.

Chevrolet Red
WARNING: Cancer - www.P65Warnings.ca.gov.

Buick Green
WARNING: Cancer - www.P65Warnings.ca.gov.

Ford Green
WARNING: Cancer - www.P65Warnings.ca.gov.

Cadillac Dark Blue
WARNING: Cancer - www.P65Warnings.ca.gov.

Hi Po Yellow
WARNING: Cancer - www.P65Warnings.ca.gov.

Chrysler Blue
WARNING: Cancer - www.P65Warnings.ca.gov.

White
WARNING: Cancer - www.P65Warnings.ca.gov.

Chrysler Turquoise
WARNING: Cancer - www.P65Warnings.ca.gov.

Chevy Orange
WARNING: Cancer - www.P65Warnings.ca.gov.

Austin Healey Green
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Buick Green Turquoise
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Chrysler Hemi Orange
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Chevrolet Blue
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Pontiac Light Blue
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Ford Blue
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Pontiac Metallic Blue
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Ford Medium Blue
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Amc Blue Green
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
d
dennis thorne

just got done useing it and my engine looks great

D
Daniel Gonzalez
Great Product

I ordered a pint of Ford Engine Red and I brushed one the paint to the engine block and was more than pleased on how the paint stuck to the block . Will definitely order more in the future!

K
Ken Lehman
The best stuff

Very good paint or anything that por15 can be put on turns out better. Great website and easy ordering. No issues.

D
David Randall
Engine enamel

Haven’t gotten to truck project yet. Still busy doing other chores. I will be ordering more products from you soon

s
stephen eldredge
awesome stuff

will order again

Application: 

Bare Steel: Remove grease, oil, and other foreign substances with water based POR-15 Cleaner Degreaser then rinse with water. If surface was previously painted, sand with 320 grit sandpaper or a POR-15 Scuff Pad then apply POR-15 Engine Enamel. If surface is bare or rusted metal you must use POR-15 Metal Prep to prepare surface before painting. Spray or brush POR-15 Metal Prep onto surface and keep wet for 10-20 minutes then rinse thoroughly with water. For best results, next apply one coat of POR-15 Rust Preventive Coating. When POR-15 Rust Preventive Coating is dry to the touch with slight finger drag (approximately 2 to 6 hours) apply POR-15 Engine Enamel directly over POR-15 Rust Preventive Coating.

Apply in well-ventilated area only. Ideal ambient temperature for application is 70°F, but an acceptable temperature range is between 50-80°F. Mix POR-15 Engine Enamel by stirring only. Do not shake. POR-15 Engine Enamel can usually be brushed without thinning. A full coat will usually cover but if a second coat is needed, apply when first coat is dry to the touch (no finger drag) and within 24 hours of first coat.

Dry Time: Wait 4-6 days before starting engine.

Previously Finished or Primed Surfaces: Glossy surfaces should be roughened with 320 grit before recoating. All blistered and loose paint must be removed. Using POR-15 Cleaner Degreaser to ensure that the surface is clean, dry, and free from oil, grease, dirt, salts, and any other contaminants.