POR-15 Clean and Etch Metal Bundle
Starting At
$41.00
Starting At
$42.00
item(s): PB-CM
To get the best results, use the best pre-paint prep products!.
Properly prepare metal surfaces for painting or coating using POR-15 Cleaner Degreaser and POR-15 Metal Prep etching and rust neutralizing solution. Prepping metal is key to having a successful paint job. This etch and clean solution works with all opaque paints. Designed for use on new bare metal, old rusty metal, and sand blasted (media blasted) metal.
For best results, remove all loose rust, grime, dirt, and old paint. For extremely oily and greasy surfaces, use the Cleaner Degreaser without diluting. For normal use, mix 4 to 1 with warm water. For second cleanings, you can dilute up to 10 to 1 with water. Soak the metal surface with cleaner and agitate with a scuffing pad or brush and rinse with water. Once dry, use the Metal Prep to soak the surface and keep wet with the solution for 30-45 minutes. Don't allow it to dry on the surface. After 30-45 minutes, thoroughly rinse with water and let the surface completely dry before coating or painting. You may see white powdery haze after it dries. This is Zinc compounds created by the Metal Prep and helps protect the surface from rusting. You can coat, prime, or paint over it.