Power Mesh

Reinforcing Fabric

item(s): 49533

POR-15 Power Mesh Reinforcing Fabric

A special heavy-duty fiberglass mesh cloth that can be used with POR-15 Rust Preventive Coating to bridge gaps and repair holes in sheet metal.

Handling Instructions: Do not handle fabric with bare hands.

Because the POR-15 Power Mesh Reinforcing Fabric is a special type of fiberglass cloth, the fibers may pierce your skin, and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this fiberglass mesh sheet. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.

How do you fill holes without welding?

Floor pan repair step 1
This floorboard has lots of rust-through, but it can be fixed.
Floor pan repair step 2
First, thoroughly clean with Cleaner Degreaser and rinse off.
Floor pan repair step 3
Next, prep the surface with Metal Prep, rinse off, and let dry.
Floor pan repair step 4
Cut a section of Power Mesh Reinforcing Fabric to fit the area. Be sure to use gloves and goggles for this project!
Floor pan repair step 5
Coat the floorboard with POR-15 Rust Preventive Coating (Silver used here) and while wet, place the POR-15 Power Mesh Reinforcing Fabric onto it. Add a few coats of POR-15 Rust Preventive Coating on top, working it into the fabric.
Floor pan repair step 6
Once the coated POR-15 Power Mesh Reinforcing Fabric dries to a rock-hard finish, it can then be coated with POR-15 Top Coat.

Customer Reviews

Based on 8 reviews
POR Power Mesh

Power Mesh is so easy to use, I have used it before and it is unbelievable how well it works! I will definitely use it again! I even shared some with a friend of mine and he was very impressed.

Robert Wilson

Works good. Dries hard as a rock. Easy to use.

Craig Weaver

Power Mesh

Douglas Rudquist

worked well but the kite was missing the mesh so I had to reorder the mesh for a additional cost.

Ethan Barr
Works well

Used it 2 weeks ago on a 150 Gallon diesel tank that leaked, it works well so far.