Made in the USA
Trusted by DIY & Professionals
Developed by in-house PHD chemists
POR-15 OEM Bed Liner truck bed and underbody coating offers superior adhesion, impact resistance, and flexibility, as well as an attractive texturized gloss black finish that provides the ultimate in rubberized truck bed and undercoating protection. Our truck bed liner is UV stable and will resist damage typically caused by exposure to UV. POR-15 truck bed liner is a low-odor product that can be cleaned with soap and water and does not have a limiting pot life. POR-15 OEM Bed Liner also has good sound dampening qualities, making it a good choice for soundproofing. Any unused product can be resealed in its container and used later for touch-up or on other projects. For the ultimate rust protection and impact resistance, use the 3-Step Stop Rust System and apply over POR-15 Rust Preventive Coating. OEM Truck Bed Liner and Underbody Coating can be used on metal or wood substrates to achieve an anti-slip surface.
One gallon of POR-15 OEM Bed Liner will cover approximately 100-120 square feet. This is enough coating to properly apply the recommended 2-coats to all standard-sized 6 foot truck beds.
Drop-in liners trap moisture, causing rust. POR-15 OEM Bedliner conforms to whatever it applied to, providing great protection and a customized look.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
I rolled it but the texture was a little spotty, so I added a third coat and it looked like it was sprayed. Much happier with the look now and It is holding up great. I also used the Stop rust system as a primer before I applied this.
This is a high quality product with great results! Recommend to anyone! 👍🏼👍🏼
I used a roller just like the instructions said to on both coats but it didn’t have the texture I wanted. It still is a very tough coating and will buy again but spray it instead next time
Great product. I applied mine by roller and brush. I tried spraying it on but don't believe my air compressor could keep up with volume of air loose being sprayed . I applied two coats of oem bedliner an one coat of rust prevention before bedliner.
All product are great an I highly recommend all their products.
I sprayed the underbody of my first gen Bronco yesterday and it looks great.
Surface Preparation: Proper surface preparation is essential to achieve a high quality finish. Read the SDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.
Previously Finished or Primed Surfaces:Using POR-15 Cleaner Degreaser ensures that the surface is clean, dry, and free from oil, grease, dirt, salts, and any other contaminants. All blistered and loose paint must be removed. All bare areas must be primed with POR-15 Rust Preventive Coating before a full coat is applied. Glossy surfaces should be roughened before recoating.
Bare Steel:Using POR-15 Cleaner Degreaser clean all surfaces to ensure they are free of loose rust, mill scale and contaminants such as oil, grease, dirt, and salts. You must use POR-15 Metal Prep if you are painting on new steel, galvanized metal, aluminum, or any smooth metal surface.
Application Information:REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. A gallon of POR-15 OEM Bed Liner will cover approximately 100-120 square feet. This is enough coating to properly apply the recommended 2-coats to all standard-sized 6 foot truck beds. Apply when air, surface and product temperatures are above 50°F (10°C) and surface temperature is at least 5°F (3°C) above the dew point*. Avoid exterior application late in the day when dew and condensation are likely to form or if rain is expected. *Air and surface temperatures must remain above 50ºF (10ºC) for the next 24 hours. PROTECT FROM FREEZING. Once applied POR-15 OEM Bed Liner will be ready for light-duty use in 24 hours and regular use in 48 hours.
Application Equipment:Brush Use a high quality nylon brush. Roller Use all-purpose short nap shed resistant phenolic core roller.
Clean Up Instructions:Clean hands and all tools using soap and water before POR-15 OEM Bed Liner has dried. Make sure the container lid is securely sealed back on to container. Unused POR-15 OEM Bed Liner can be used at any time.
Sign up to get the latest on sales, new releases and download our Digital Catalog!