Have a question for our team?


Caliper Painting Kit

Clean, Prep, & Paint Brake Calipers

item(s): 42839

Always Ships Free


Dress Up Your Calipers! Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish using the POR-15 Caliper Painting Kit. Our new caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes, and it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like; our brake caliper paint system will stand up to just about anything.

POR-15 Caliper Painting Kit has everything you need to clean, prep, and paint your calipers. POR-15 Caliper Paint has excellent coverage properties, brilliant ceramic-like colors, and withstands temperatures up to 300°F.


  • 8oz POR-15 Cleaner Degreaser
  • 8oz POR-15 Metal Prep
  • 4oz POR-15 Rust Preventive
  • 4oz POR-15 Caliper Paint
  • Latex Gloves
  • 2 Paint Applicators
  • Detailed Instructions and Tips

POR-15 Caliper Painting Kit Directions

Before POR-15 Caliper Painting Kit

After POR-15 Caliper Painting Kit

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

WARNING: Cancer - www.P65Warnings.ca.gov.

WARNING: Cancer - www.P65Warnings.ca.gov.

Customer Reviews

Based on 17 reviews
David Reyes
Very nice kit

I think the products used in prepping and painting the brake calipers were great. I did feel that the foam brush was not very good and at least two paint brushes are needed.

Caliper Paint Kit

Love the kit! Easy to use & creates an almost bulletproof-like coating on the calipers. The GF liked how mine turned out so I bought a kit for the GF’s Jeep for Christmas. Will be doing that this weekend.

POR-15 Gray Pint

Most of the kit was thrown away. Only needed the gray pint can, but couldn't purchase just that even though you list it aas a part number in your catalog. Only needed a small amount and haven't had any lucknstoring POR-15 for long periods of time.

Chris Hill
Caliper Paint

This product is excellent, follow the instructions, any extra cleaning like a light duty wire wheel only helps adhesive quality. The flow out of the final coat is amazing even using a brush application. Now lets see how it stands up on the road?

Timothy J Hill
Great product

All POR15 products are made to last, good to have brake caliper paint in a kit to make it easy to do professional job.

Step 1: Remove all four wheels from vehicle. Calipers don’t need to be removed. Don’t remove brake line.

Step 2: Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using.

Step 3: Rinse cleaned caliper thoroughly with water and dry with clean towel. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.

Step 4: Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, and caliper piston boots and anything else you don’t want painted.

Step 5: Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paint the caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure you don’t miss any spots which could rust later if not covered.

Step 6: When the POR-15 Rust Preventive Coating is just dry to the touch, with slight finger-drag remaining, normally in the 2-5 hour range, it’s ready for the POR-15 Caliper Paint to be applied. Open the can of POR-15 Caliper Paint, stir thoroughly, and apply the first coat in thin but even strokes. When the first coat is dry (3 -4 hours), apply a second coat to achieve a beautiful ceramic-like finish.

These products should only be handled when wearing latex gloves, eye protection, and NOSHA approved respirator. Always work in a well ventilated area.