Related Products
Products you may like
POR-15 High Build Primer
POR-15 High Build Primer
POR-15 High Build Primer
POR-15 High Build PrimerStock Adequate!Ready to ship
Instructions
Warning
POR-15 High Build Primer is a sealer bonding coat that provides sandable and buildable coating that can be applied over dry POR-15 Rust Preventive Coating and all POR-15 topcoat paints to enable quick refinishing and recoating of these products. For best adhesion on the Rust Preventive Coating, apply the primer when the Rust Preventive is dry to the touch but still slightly tacky (has a finger drag) or scuff cured Rust Preventive with 240-320 grit or scuff pad. POR-15 High Build Primer is a single component formula that fills in minor Imperfections. POR-15 High Build Sandable Primer adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces. This primer can be applied with a brush, roller, and sprayed with a 1.7 - 2.0 tip HVLP setup. If required, High Build Primer can be reduced with POR-15 Reducer up to 10%.
We developed this special "interlocking" primer after many requests from customers who wanted a coating with special adhesion characteristics that make it perfect for most painted surfaces, especially POR-15 Rust Preventive Coating.
This POR-15 tie coat primer is highly resistant to penetrating topcoats, like lacquers, enamels, and two-component finishes. It sands very smoothly, as well. Try some of this sanding high build primer on your next project.
I had put on por 15 rust sealer and then put the high build primer, worked very well. I also have a 67 chevelle i will be using over the por 15 rust sealer. The priner went on great and was easy to sand.
Used this product before and it seems to bond well and products bond well applied over this product.
POR-15 High Build Primer
I applied 2 coats of POR 15 High Build Primer over 2 coats of POR 15 Rust Prevention Coating during my 1978 Chevy truck bed restoration. Both products were easy to apply and covered well post sandblasting and using Metal Prep on the inside of the bed which had some surface rust. I would highly recommend these POR 15 products for your restoration projects.
But it seemed sealed from the inside….
Well, can leaked and I cant lift product out of box. It is now totally sealed all packaging inside and cannot even lift out to check where contents leaked from. I did not continue and now responding to a soution.
I can take a credit on my account and chose another product if that can be an option.
Thanks in advance. Keith Ellis. [****] (c).
Products you may like
Your Browsing History
I had put on por 15 rust sealer and then put the high build primer, worked very well. I also have a 67 chevelle i will be using over the por 15 rust sealer. The priner went on great and was easy to sand.
Used this product before and it seems to bond well and products bond well applied over this product.
POR-15 High Build Primer
I applied 2 coats of POR 15 High Build Primer over 2 coats of POR 15 Rust Prevention Coating during my 1978 Chevy truck bed restoration. Both products were easy to apply and covered well post sandblasting and using Metal Prep on the inside of the bed which had some surface rust. I would highly recommend these POR 15 products for your restoration projects.
But it seemed sealed from the inside….
Well, can leaked and I cant lift product out of box. It is now totally sealed all packaging inside and cannot even lift out to check where contents leaked from. I did not continue and now responding to a soution.
I can take a credit on my account and chose another product if that can be an option.
Thanks in advance. Keith Ellis. [****] (c).
I had put on por 15 rust sealer and then put the high build primer, worked very well. I also have a 67 chevelle i will be using over the por 15 rust sealer. The priner went on great and was easy to sand.
Used this product before and it seems to bond well and products bond well applied over this product.
POR-15 High Build Primer
I applied 2 coats of POR 15 High Build Primer over 2 coats of POR 15 Rust Prevention Coating during my 1978 Chevy truck bed restoration. Both products were easy to apply and covered well post sandblasting and using Metal Prep on the inside of the bed which had some surface rust. I would highly recommend these POR 15 products for your restoration projects.
Pretty rough finish after two coats, while rolled on. It did build quickly, and covered well after two applications. Requiring a lot of sanding to smooth out the orange peel. It took 24-48 hours to dry enough to dry sand.
But it seemed sealed from the inside….
Well, can leaked and I cant lift product out of box. It is now totally sealed all packaging inside and cannot even lift out to check where contents leaked from. I did not continue and now responding to a soution.
I can take a credit on my account and chose another product if that can be an option.
Thanks in advance. Keith Ellis. [****] (c).
High Build Primer
Used to do the trunk work perfectly to this point and waiting for my liner to put in and my job will have been completed but it definitely stopped all the rest in his tracks
I had difficulty using this product for the first time. It would not spray on in a wet even coat. It came without instructions regarding reduction and the air pressure to use when spraying. I used a small paint gun specifically made for primer but this primer seemed very thick and in need of reduction. I had to guess at the amount and type of reducer because the product came without information regarding reduction.
A 1.7-2.0 tip usually works without reducing. You can use our POR-15 Reducer Solvent or a quality automotive reducer for urethane primers up to 15%.
The best high build primer I have used. Extremely durable also. Sands extremely well if you give proper curing time and use quality paper.”3m”
It's the best.
I’ve used a lot of different brands of primers over the years, I mainly restore farm equipment. By far the best adhesion to metal and it does get rather hard, fills good. I will buy again
Sprays easy, covers well, good sanding, and adheres to POR15. All good.
This primer will highbuild for sure. Got it on too thick and had a lot of sanding to do
Does not sand well
I would highly recommend the product, it is the only product I trust to help protect my project vehicle.
Working on a restoration of a 73 Ford F-100 and needed a better color for the engine bay area. While rust treating the bay, picked up a can of High Build Primer and was happy to discover it has a nice bluish-grey tint to it perfect for replacing the original Ford baby blue in the engine bay that I do not care for. The goal is to get the engine core with its darker Ford Blue to pop up visually within the bay, but still keep everything looking like it was "Ford-true." The High Build Primer complements the two tone exterior blue of the truck nicely. Will coat with Clear Matte from POR-15 to finish it off.