Have a Question? ASK THE EXPERT

Free Shipping On All Orders $150+

0

Your Cart is Empty

By Category
  • Rust Preventive Coating

  • POR-15 Rubberized Undercoatings

    Bedliner & Undercoat

  • POR-15 Rust Remover Dissolving Bath Solution

    Rust Remover

  • High Temp Coatings

  • Patch & Putty

  • Preparation Products

  • POR-15 Topcoat Paints

    Topcoats

  • Car Detailing

  • Accessories

  • POR-15 Primers

    Primers

  • Fuel Tank Repair

  • Kits

  • By Use
  • Restoration

  • Maintenance

  • Resto-Mod

  • Six Pack Stop Rust System

    item(s): PB-SP3SS

    POR-15 Six Pack Stop Rust System is designed for the individual who has a lot of small projects or just likes the flexibility of having multiple cans during a job.

    This bundle of rust prevention solutions contains POR-15 Cleaner Degreaser, POR-15 Metal Prep, and Six 4 oz. cans of Gloss Black POR-15 Rust Preventive Coating. Now you'll only open small amounts of POR-15 Rust Preventive Coating as you need them, so less waste! Each 4 fl oz Rust Preventive Coating can cover 6 square feet with two coats applied. POR-15 Six Pack comes with enough POR-15 Rust Preventive Coating to cover 36 square feet with two coats. Use this anti-corrosion solutions today!


    The ultimate rust preventive system for permanent corrosion protection. Shields metal in just 3 easy steps, clean it, prep it, and coat it.

    The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. Prepare and prime bare metal or directly paint rust with confidence. The clear-cut process allows for the proper cleaning, prepping, and coating of metal to create a non-porous surface that seals and protects metal from water, chemicals, salt, and other corrosive contaminants.

    The components of the 3-Step Stop Rust System

    Step 1 Image

    Step 1: POR-15 Cleaner Degreaser (Formerly Marine Clean) removes grease, oil, dirt, and grime in one application without leaving residues, noxious fumes, or flammable solvents.

    Step 2 Image

    Step 2: POR-15 Metal Prep (Formerly Prep & Ready) provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including shiny polished metal surfaces.

    Step 3 Image

    Step 3: POR-15 Rust Preventive Coating is a high-tech, high-performance rust preventive coating designed for application directly on stable rust or seasoned metal surfaces. Provides permanent rust protection with a hammer-tough finish resistant to acids, alkalis, and repels all fuels and oils.

    Step-by-step Restoration

    Before Image of a Rusty truck bed

    Before: Heavily rusted diamond-plate pickup truck beds can be a problem, fix them permanently with the POR-15 3-Step System.

    Step 1

    Step 1: Clean it! Remove loose rust and degrease the surface with a water-based Cleaner Degreaser


    Step 2

    Step 2: Prep it! Neutralize rust and etch with Metal Prep.


    Step 3

    Step 3: Coat it! After thorough washing and drying, coat with POR-15 Rust Preventive Coating, right onto the rust!


    Top Coat for UV protection

    For areas exposed to U.V. light: Topcoat with Top Coat, 2K Urethane, or other top coat of your choice.

    After

    After: Now you have a PERMANENTLY repaired truck bed, that will NOT rust again.

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    Gregory Johnson
    Nice Size Cans

    I like the product and it works great. You guys need to go back to the way the old cans were where you could actually remove the lids. So frustrating when I distort the lid trying to remove it. Product 5 stars Container 1 star

    J
    J.
    Best for many small jobs

    Bought this because I have a lot of smaller jobs where larger can would spoil. This is a no brainer package for me. Had two cans that I couldn't take the lid off so I used an old style can opener to puncture holes on the bottom side and put it in a glass mason jar and painted. Other than that, paint went down great. Looks like it was sprayed on and dried hard as a rock.

    Metal that is media blasted provides the best surface for coatings. If not possible, remove all built-up dirt, loose rust, and paint. Note that if you leave old paint behind, the rust preventive can only adhere as strongly as the paint it is applied over. This generally is not as strong as applying to prepped and scuffed-up bare metal.

    These products should only be handled when wearing latex gloves, eye protection, and NOSHA approved respirator. Always work in a well-ventilated area. 

    Step 1. Apply our POR-15 Cleaner Degreaser to a surface, agitate the surface with a scuff pad or brush and keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. Repeat if surface is still oily or greasy. It is important not to allow the product to dry on the surface prior to rinsing with water. POR-15 Cleaner Degreaser is a heavy duty water soluble cleaner that may be used over metal, wood, fiberglass, vinyl and concrete.

    Step 2. Apply POR-15 Metal Prep to the bare metal surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. It is important not to allow POR-15 Metal Prep to dry on the surface prior to rinsing with water. Once dry the surface may show a flash rust or white powdery residue this is perfectly normal. POR-15 Metal Prep provides the best surface profile and greatly improves paint adhesion to any type of metal surface for opaque paints and coatings.

    Step 3. Wearing gloves and a properly fitted NOSHA approved respirator is recommended when applying POR-15 Rust Preventive Coating. Do Not shake. Mix by stirring until all solids at the bottom of the can are dissolved. Mixing may be done with a drill mixer on slow or by hand. It is recommended to apply two thin covering coats of POR-15 Rust Preventive Coating. Apply the first coat to the properly prepared substrate with the supplied brush. Apply the second coat when the first coat is dry but still slightly tacky to the touch. If POR-15 Rust Preventive Coating is applied too heavy, brush marks may result in the finish. Do not apply this product if the humidity is above 70%. If the humidity is too high POR-15 Rust Preventive Coating will surface dry too quickly which may result in small bubbles in the finish. POR-15 Rust Preventive Coating requires an opaque topcoat only if exposed to direct sunlight. Best chemical adhesion to POR-15 Rust Preventive is when it is dry but still tacky (it has a finger drag). If the rust preventive is already completely dried or cured, you must scuff the surface with a maroon pad or 320-380 grit sandpaper for mechanical adhesion of a topcoat.

    If your project will be exposed to U.V. light, topcoat it with POR-15 TopCoat, Engine Enamel, Caliper Paint, Detail Paint, or 2K Urethane industrial topcoat. You can topcoat with most other UV safe opaque paint as well.