Have a Question? ASK THE EXPERT

Free Shipping On All Orders $150+

0

Your Cart is Empty

By Category
  • Rust Preventive Coating

  • POR-15 Rubberized Undercoatings

    Bedliner & Undercoat

  • POR-15 Rust Remover Dissolving Bath Solution

    Rust Remover

  • High Temp Coatings

  • Patch & Putty

  • Preparation Products

  • POR-15 Topcoat Paints

    Topcoats

  • Car Detailing

  • Accessories

  • POR-15 Primers

    Primers

  • Fuel Tank Repair

  • Kits

  • By Use
  • Restoration

  • Maintenance

  • Resto-Mod

  • 3-Step Stop Rust System

    item(s): PB-3SS

    The ultimate rust preventive system for permanent corrosion protection. Shields metal in just 3 easy steps, clean it, prep it, and coat it. Better than any rust paint available!

    The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. Prepare and prime bare metal or directly paint rust with confidence. The clear-cut process when using this rust stopper for metal allows for the proper cleaning, prepping, and coating of metal to create a non-porous surface to seal and protect metal from water, chemicals, salt, acids, alkalis, and other corrosive contaminants. Black and Gray Rust Preventive Coatings are non-conductive and good for EV conversion applications. A topcoat is required if exposed to UV light. Check out this rust stop undercoating now!

    The components of the 3-Step Stop Rust System

    Step 1 POR-15 Cleaner Degreaser

    Step 1: POR-15 Cleaner Degreaser (Formerly Marine Clean) removes grease, oil, dirt, and grime in one application without leaving residues, noxious fumes, or flammable solvents.

    Step 2 POR-15 Metal Prep

    Step 2: POR-15 Metal Prep (Formerly Prep & Ready) etches to provide the best adhesion for POR-15 Rust Preventive Coating on metal surfaces.

    Step 2 POR-15 Rust Preventive Coating

    Step 3: POR-15 Rust Preventive Coating is a high-tech, high-performance rust preventive coating designed for application directly on stable rust or seasoned metal surfaces. Permanent rust protection with a hammer-tough finish resistant to acids, alkalis, oils, and repels all fuels.

    Step-by-step Restoration

    Before Image of a Rusty truck bed

    Before: Heavily rusted diamond-plate pickup truck beds can be a problem, fix them permanently with the POR-15 3-Step System.

    Step 1

    Step 1: Clean it! Remove loose rust and degrease the surface with a water-based Cleaner Degreaser


    Step 2

    Step 2: Prep it! Neutralize rust and etch with Metal Prep.


    Step 3

    Step 3: Coat it! After thorough washing and drying, coat with POR-15 Rust Preventive Coating, right onto the rust!


    Top Coat for UV protection

    For areas exposed to U.V. light: Topcoat with Top Coat, 2K Industrial Urethane, or other UV safe opaque paint of your choice.

    After

    After: Now you have a PERMANENTLY repaired truck bed, that won't rust again.


    POR-15 Rust Preventive Coverage

    • Pint 25 sq ft with two coats
    • Quart 50 sq ft with two coats
    • Gallon 200 sq ft with two coats

    POR-15 Rust Preventive Testing Results

    Structural Strength Measures

    ASTM C-580 Flexural Strength - measures flexural strength and modulus of elasticity. 5,200 pounds per square inch

    ASTM C-579 Compressive Strength - measures compressive strength, the capacity of axially directed pushing forces. 12,500 pounds per square inch - Verified. Not tested to failure.

    ASTM C-307 Tensile Strength - measures the tensile strength of cured chemical-resistant materials. 3,200 pounds per square inch

    ASTM D-4541 Bond Strength To Concrete - measures the strength of coatings bond to concrete. Concrete fails before POR-15 Rust Preventive Coating. It exceeds the tensile strength of concrete

    Abrasion Resistance

    ASTM C-501 Taber Abraser - abrasive wear by determination of the loss of weight resulting from abrasion. In two separate tests, POR-15 Rust Preventive had:

    • No loss after 1,000 cycles with a 1,000 gram abraser
    • Loss after 10,000 cycles with 1,000 gram abraser = 0.09 grams

    Weather Resistance

    Weatherometer - accurate weather resistance indicator of cycling of conditions. The cycle is 30 mins at 135 degrees F, 30% relative humidity and 30 mins at 75-80 degrees F, 100% relative humidity 1,000 hours of exposure equals 5 years of simulated exposure in the Rocky Mountain region. There was no change in the 3 panels coated with POR-15 Rust Preventive Coating exposed for 2,000 hours.

    ASTM B-117 Salt Spray - specimens exposed at specific locations and angles. Created a 100% relative humidity condition in the exposure zone.

    Two separate B-117 tests. One with new bare steel and the other with rusted steel. Both were coated with POR-15 Rust Preventive Coating.

    • No change in 3 panels of new steel exposed for 250 hours at 98 degrees. Thickness = 2 mils
    • No change in 3 panels of rusted steel exposed for 1000 hours at 98 degrees. Thickness = 2 mils

    Chemical Resistance

    Chemical Bath Test - After 200 hours of soaking in the following chemical bathes, panels coated with POR-15 Rust Preventive Coating experienced no changes: 10% hydrochloric acid, 50% sulphuric acid, 55% chromate, 85% phosphoric acid, 10% sodium hydroxide 98% methanol.

    Raw Sewage Test - A metal box that houses a filter for raw sewage in a treatment facility was coated with POR-15 Rust Preventive. After a year of service, no undercutting or rusting was present on the housing.

    Impact, Porosity, and Temperature Tests

    Mil-D-3134J Impact Resistance - POR-15 Rust Preventive Coating exceeds standards.

    ASTM C-413 Water Absorption - method covers the determination of absorption of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes. 0.0001 maximum

    NACE Stand TM0174 - 0.00 POR-15 Rust Preventive Coating is a non-porous coating.

    Temperature Resistance - POR-15 Rust Preventive Coating is temperature resistant up to 450° continuously. Test showed no adhesion lost at 450° F for 10 hours.

    Customer Reviews

    Based on 23 reviews
    87%
    (20)
    13%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Alex Alib
    Good Service

    POR15 Cures from atmosphere, air and moisture. Keep the lid on as much as possible,
    pour POR15 into a paper cup and put the lid over the can to only allow minimum exposure to atmosphere.
    When you are done painting, use a plastic sheet over the can then close with the can top.
    PUT the can in a plastic bag and store the can UPSIDE DOWN. Keeping in a tray
    would be a good idea in case some of the POR15 leaks out.

    N
    N.U.
    Great Results!

    I used this on my 2002 Chevy Silverado 1500 Extended Cab. I live in New England, so major rust issues. Removed the bed, gas tank, leaf springs, and shocks; Followed the instructions. See the before and after pictures. Amazing results. very happy with the product; next summer I will take the cab off and restore the front of the truck!

    D
    Daniel Amengual
    Awesome Product

    Removed rust from my boat trailer axes and used all three products. Easy to use just follow directions. Drying time depends on weather. I gave my trailer axe two coats. Easy to apply with a brush. Make sure you have adequate ventilation. Tailer looks better than new with a Hard Shinny Coat.

    j
    john kemper
    the black topcoat

    love how it evens itself out, really nice gloss finish

    S
    Stanley Cielesz
    Outstanding Product, You can Store it after use, try this advice

    I have used Por15 on a lot of projects. VERY TOUGH Layer after cured. It is affected by UV
    and if not protected will wear off in a few years time if you do not coat it with a Top Coat Paint.
    HUGE WARNING, Don't get POR15 on any moveable parts, hinges, or bolts that you may want
    to remove later.
    Once POR15 cures, it will lock any seams, bolts, nuts into basically ONE WHOLE PIECE.
    MAKE SURE the surface is clean, Grease and Oil free. Use the cleaners.

    POR15 goes on like a very fluid paint, IT WILL RUN if you apply too much at once so
    be watchful. Be cautious as you can't brush POR15 too much during the dry period as
    it begins to skim over, brushing will mess it up. Any voids, seams spaces between
    moving parts WILL BE SEALED AS ONE SOLID PIECE. fair warning.
    I am always using POR15 for some project to prevent rust or to stop rust. You can
    just open the can and use a little if you store it carefully.

    -- FOR STORAGE --
    POR15 Cures from atmosphere, air and moisture. Keep the lid on as much as possible,
    pour POR15 into a paper cup and put the lid over the can to only allow minimum exposure to atmosphere.
    When you are done painting, use a plastic sheet over the can then close with the can top.
    PUT the can in a plastic bag and store the can UPSIDE DOWN. Keeping in a tray
    would be a good idea in case some of the POR15 leaks out.

    The POR15 in the can WILL SKIM OVER on the top, the side with the Air inside.
    IF you store a used POR15 can Top side UP, the top of the POR15 WILL skim
    over. If the skim layer is not too thick, you can break it and access the product
    under the skim layer. Better Idea to store the can upside down and let the
    skim layer form on the bottom side of the can.
    The POR15 should be usable when you open it again, unless you allowed long term exposure
    to the atmosphere when you were using it. If the POR15 had a long term exposure to the
    atmosphere, then it may cure completely in the can no matter what.

    WHEN USING, wear old clothes and gloves.
    POR15 on skin is difficult to get off and you may end up wearing it off. Try kerosene on a
    paper towel to get most of it off the skin.
    You CAN NOT get POR15 off of clothes or concrete and it will take literally YEARS for the
    POR15 to wear off of CONCRETE.

    Metal that is media blasted provides the best surface for coatings. If not possible, remove all built-up dirt, loose rust, and paint. Note that if you leave old paint behind, the rust preventive can only adhere as strongly as the paint it is applied over. This generally is not as strong as applying to prepped and scuffed-up bare metal.

    These products should only be handled when wearing latex gloves, eye protection, and NOSHA approved respirator. Always work in a well-ventilated area. 

    Step 1. Apply our POR-15 Cleaner Degreaser to a surface, agitate the surface with a scuff pad or brush and keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. Repeat if surface is still oily or greasy. It is important not to allow the product to dry on the surface prior to rinsing with water. POR-15 Cleaner Degreaser is a heavy duty water soluble cleaner that may be used over metal, wood, fiberglass, vinyl and concrete.

    Step 2. Apply POR-15 Metal Prep to the bare metal surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. It is important not to allow POR-15 Metal Prep to dry on the surface prior to rinsing with water. Once dry the surface may show a flash rust or white powdery residue this is perfectly normal. POR-15 Metal Prep provides the best surface profile and greatly improves paint adhesion to any type of metal surface for opaque paints and coatings.

    Step 3. Wearing gloves and a properly fitted NOSHA approved respirator is recommended when applying POR-15 Rust Preventive Coating. Do Not shake. Mix by stirring until all solids at the bottom of the can are dissolved. Mixing may be done with a drill mixer on slow or by hand. It is recommended to apply two thin covering coats of POR-15 Rust Preventive Coating. Apply the first coat to the properly prepared substrate with a brush, roller, or HVLP (proper PPE required). Apply the second coat when the first coat is dry but still slightly tacky to the touch. If POR-15 Rust Preventive Coating is applied too heavy, brush marks may result in the finish. Do not apply this product if the humidity is above 70%. If the humidity is too high POR-15 Rust Preventive Coating will surface dry too quickly which may result in small bubbles in the finish. POR-15 Rust Preventive Coating requires an opaque topcoat only if exposed to direct sunlight. Best chemical adhesion to POR-15 Rust Preventive is when it is dry but still tacky (it has a finger drag). If the rust preventive is already completely dried or cured, you must scuff the surface with a maroon pad or 320-380 grit sandpaper for mechanical adhesion of a topcoat.

    If your project will be exposed to U.V. light, topcoat it with POR-15 TopCoat, Engine Enamel, Caliper Paint, Detail Paint, or 2K Urethane industrial topcoat. You can topcoat with most other UV safe opaque paint as well.