Car Shampoo
DIRECTIONS: Use with a traditional hose & bucket, with a foam gun, or even a pressure washer & foam cannon setup. With a traditional hose & bucket, we suggest using the two bucket car wash method, a clean bucket for the shampoo and water and a rinse bucket to dunk and clean the sponge.
For use with 5 gallon bucket:
- Add 2-4 ounces of soap to an empty bucket. Spray a pressurized blast of water to fill the bucket and produce loads of suds.
- Wash car or truck with your normal wash routine.
For use with a foam gun / cannon setup:
- Fill the water/soap reservoir with clean water until almost full. Note if there are any fill lines printed on the bottle.
- Add 2-4 ounces of soap to the water / soap reservoir.
- Attach to foam gun/cannon and use per manufacturer's instructions.
Detail Spray
DIRECTIONS: After washing your car, mist Detail Spray over the car and dry off with a clean, dry towel. Under the hood, dust and clean all top-side surfaces. Use it to wipe down door jambs and trunk sills. You can also use Detail Spray on the interior of your car as a dusting agent to wipe down your dash, console, door panels and seats. Just mist a microfiber towel and wipe the surface.
1-Step Compound & Polish
DIRECTIONS: Shake well and work on a cool panel. Apply 4 drops of polish onto a foam pad. Spread evenly over 2-ft by 2-ft area or smaller. Set speed to 3-4. Keep pad flat while working. Work slowly in up-down and left-right motions, light pressure, 25% overlap. Work until clear on surface. Remove residue with a premium microfiber towel. Inspect surface.
Interior Detailer
DIRECTIONS: Simply spray and wipe with your favorite microfiber cleaning cloth. Our Interior Detailer is safe on all interior surfaces, which includes leather, vinyl, pleather, navigation screens and plastic!
Tire Dressing Créme
DIRECTIONS: Apply Tire Dressing Créme on washed, decontaminated, and fully dried rubber or plastic surface that is cool to the touch. Can be applied directly or with a foam applicator. For tires with large tread blocks, apply Tire Dressing Creme directly onto the surface and thoroughly wipe it with a VRT Block or foam applicator.
Wheel Cleaner
DIRECTIONS: Directions for use: Simply spray on, allow the cleaner to activate, and then agitate using quality cleaning tools. This thicker, more viscous formula clings to wheel surfaces and allows the European-derived formula to melt away the stubborn brake dust commonly left behind by many of today’s high-performance braking systems.
Note: Do not use on hot surfaces and do not allow to dry.