Made in the USA
Trusted by DIY & Professionals
Developed by in-house PHD chemists
POR-15 Rust Preventive Coating is a high-performance corrosion protective coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
The secret lies in POR-15 Rust Preventive Coating's curing process. Most paints dry through evaporation, but POR-15 Rust Preventive Coating dries faster when moisture is present. It has the opposite chemistry of ordinary paints. Now add to that POR-15 Rust Preventive Coating incredible hardness, toughness, and flexibility and you have a coating that is practically indestructible. POR-15 Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep to properly get your surface ready for the POR-15 Rust Preventive Coating. You'll be amazed at the toughness of this corrosion protective coatings!
Before:Heavily rusted diamond-plate pickup truck beds can be a problem, fix them permanently with POR-15 Rust Preventive Coating.
Step 1: First remove loose rust and degrease carefully with water-based Cleaner Degreaser
Step 2: Next, neutralize rust and prep with Metal Prep.
Step 3: After thorough washing and drying, coat with POR-15 Rust Preventive Coating, right onto the rust!
Step 4: Next, topcoat with Top Coat, 2K Urethane, or other top coat of your choice.
After: Now you have a PERMANENTLY repaired truck bed, that will NOT rust again.
Farm, industrial, marine commercial, and construction industries all use POR-15 Rust Preventive Coating to protect expensive and valuable equipment against rust, abrasion, and even graffiti. POR-15 Rust Preventive Coating also has excellent “surface tolerance”, which means it works very well on porous surfaces, such as wood, fiberglass, concrete, and bricks. Try some for yourself!
“POR-15 Rust Preventive Coating is impervious to just about anything short of an atom bomb!”
Hot Rod Magazine
WARNING: Cancer - www.P65Warnings.ca.gov.
Amazing product thank you.
Surface Preparation:To coat rusted or bare metal surfaces. Remove grease, oil, and other foreign substances using POR-15 water-based cleaner and prep products per the listed instructions.
Stir POR-15 Rust Preventive Coating thoroughly, DO NOT SHAKE, then dispense a quantity of POR-15® Rust Preventive Coating into a separate container to avoid contamination.
Application:Apply in thin coats. Always apply a minimum of two coats. If necessary, only thin with POR-15 Solvent, up to 5%. POR-15 Rust Preventive Coating may be recoated or topcoated when dry to the touch with a slight “finger drag”, typically 2 to 6 hours. To coat over cured POR-15 Rust Preventive Coating, scuff the surface with 320 grit sandpaper until gloss is dull, and then apply coating.
Clean Up:Use POR-15 Solvent for clean-up, which must be done before POR-15 Rust Preventive Coating dries; once dry, POR-15 Rust Preventive Coating cannot be removed by any solvent. Use of gloves and ventilating equipment is strongly recommended. Avoid skin contact. Remove from skin at once to avoid temporary staining. Moisture will shorten the life of unused POR-15 Rust Preventive Coating. Seal can immediately after dispensing.
Tip:Place plastic wrap between the lid and the can lip to prevent POR-15 Rust Preventive Coating from permanently sealing the can shut.
Sign up to get the latest on sales, new releases and download our Digital Catalog!