2K Top Coat Spray
$57.00
item(s): 65818
Next-generation advanced DTS (Direct-to-Surface) coating engineered for true 2K performance that is easy to use with up to a 6 month pot-life!
Enhanced durability, simplified application, and extended working time, allowing for more precise results with less waste in a extra large 500mL can. This new generation of innovative POR-15 2K spray coating is perfect for automotive, agricultural, heavy-duty, and industrial applications. The advanced technology combines a deactivated hardener and 2K binder in a single chamber—no mixing and no puncturing required. Built for modern coating demands, this DTS system sets a new standard in 2K surface technology. When sprayed, moisture in the air activates the hardener, triggering a true 2-component chemical reaction during application. Unlike traditional 2K aerosols that expire within hours, POR-15 2K Top Coat remains usable for up to 6 months, reducing waste and maximizing value. It delivers superior adhesion, corrosion protection, impacts, and high resistance to chemicals, fuel, scratches, and UV. Compatible with metal, aluminum, fiberglass, and most plastics. POR-15 2K Top Coat offers smooth, professional results with an easy application.
Available in a range of automotive, heavy duty machinery, industrial, and farm-matched colors. Also available in a non-yellowing clear coat that can be applied direct-to surface or over other UV safe base colors for extra protection from UV fade, impacts, and scratches. The 2K Top Coat clear can be cut and polished like a traditional automotive clear for a super smooth shiny finish.
*All opaque colors are compatible with POR-15 Rust Preventive Coating (Stop Rust System) for maximum durability and UV protection. The 2K Clear is not recommended over the POR-15 Rust Preventive Coating.
OEM color matches for Kubota (HD IC Orange), New Holland (HD AG Blue), John Deere (HD AG Green & HD IC Yellow), Caterpillar, Case IH (HD AG Red).
Features:
- Innovative 2K technology with no mixing or puncturing required
- Dual-chamber system activates automatically during spraying
- True 2-component performance with on-demand chemical crosslinking
- Up to 6-month usability after opening (no wasted product)
- Compatible with metal, aluminum, chrome, fiberglass, and most plastics
- Works over POR-15 Rust Preventive Coating for added UV protection*
- Direct-to-surface (DTM/DTS) when properly prepped
- Superior adhesion and corrosion resistance
- Smooth, professional spray finish
- Resistant to chemicals, fuel, fertilizer, scratches, and impacts
- Automotive colors, OEM farm and HD equipment color matches
- Non-yellowing clear coat available; can be cut and polished
- High Capacity 500mL Can Covers up to 27 sq ft (2.5 m2)
- Saves time and reduces material waste
- Ideal for automotive, agricultural, heavy-duty, and industrial use
Coverage: 27 sq ft (2.5 m2)
WARNING: Risk of cancer and reproductive harm from exposure to 4-methylpentan-2-one. See www.P65Warnings.ca.gov.
SURFACE PREPARATION: Sand to roughen bare metal, old paint, and surface imperfections with 180-220 grit, or use a coarse media blast if available. Clean thoroughly with POR-15® Cleaner Degreaser, then treat the surface with POR-15® Metal Prep to etch and neutralize it. If applying to bare metal, application of POR-15® Rust Preventive Coating is recommended as a primer for high-performance corrosion protection. When applying over POR-15® Rust Preventive Coating, it’s best to spray POR-15® 2K Top Coat (opaque colors only) when the Rust Preventive Coating is dry to the touch, but is slightly tacky (has a finger drag). If the POR-15® Rust Preventive Coating has fully cured, lightly scuff the surface with 280–320 grit paper, then clean and degrease again. Once the surface is completely dry, apply POR-15® 2K Top Coat.
APPLICATION: Shake can in all directions for 3 minutes before and during use. Keep the can distance 6-10 IN from surface while applying. Apply 2-3 coats in a crosshatch pattern while overlapping the previous pass. Spray the first coat from top to bottom, passing beyond each surface edge as you go. Spray the second coat from right to left, passing the surface edge as you go. Spray upside down for five seconds to clean nozzle when done.
INFORMATION VALID AT +68°F (+20°C), RELATIVE AIR HUMIDITY 25–75 %:
RECOAT TIME: Wait 5-8 minutes between coats. BUILD: Maximum 3 coats. HANDLING TIME: Touch ready in 30-45 minutes. HARDNESS: Scratch resistant in 12-16 hours. CURE TIME: Chemical resistant in 14-16 days. COVERAGE: up to 27 sq ft. (2.5 m2). Before using read all warnings labels and instructions, including those at POR15.com. Safety Information
DANGER: Extremely flammable aerosol. Contains gas under pressure, may explode if heated. Suspected of causing cancer. Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Harmful if inhaled. PREVENTION: Keep away from heat/sparks/open flames/other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing vapor/spray. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear eye protection.
STORAGE: Store in a well-ventilated place. Keep container tightly closed when not in use. Protect from sunlight. Do not expose to temperatures exceeding 120ºF/49ºC. DISPOSAL: Dispose of contents/container in accordance with local/regional/national regulations.
PRECAUTIONARY STATEMENTS: If medical advice is needed, have product container or label at hand. KEEP OUT OF REACH OF CHILDREN. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves, protective clothing, eye protection and face protection Protect from sunlight. Do not expose to temperatures exceeding 120ºF/49ºC. Dispose of the contents and its container using the separate collection system in your municipality.
FIRST AID: FOR INHALATION: If you experience difficulty breathing, leave area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. IF INGESTION/ASPIRATION: DO NOT induce vomiting; Rinse out the mouth and throat and immediately call Poison Control Center and have label available. FOR SKIN CONTACT: Wash thoroughly with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if skin irritation occurs or you feel unwell. FOR EYE CONTACT: Flush eyes immediately with plenty of fresh water. Do not rub or close their eyes. Remove contact lenses if possible. Continue eye flushing with water for at least 15 minutes and get medical attention immediately.