POR-15 Six Pack Stop Rust System is designed for the individual who has a lot of small projects or just likes the flexibility of having multiple cans during a job.
This bundle of rust prevention solutions contains POR-15 Cleaner Degreaser, POR-15 Metal Prep, and Six 4 oz. cans of Gloss Black POR-15 Rust Preventive Coating. Now you'll only open small amounts of POR-15 Rust Preventive Coating as you need them, so less waste! Each 4 fl oz Rust Preventive Coating can cover 6 square feet with two coats applied. POR-15 Six Pack comes with enough POR-15 Rust Preventive Coating to cover 36 square feet with two coats. Use this anti-corrosion solutions today!
The ultimate rust preventive system for permanent corrosion protection. Shields metal in just 3 easy steps, clean it, prep it, and coat it.
The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. Prepare and prime bare metal or directly paint rust with confidence. The clear-cut process allows for the proper cleaning, prepping, and coating of metal to create a non-porous surface that seals and protects metal from water, chemicals, salt, and other corrosive contaminants.
The components of the 3-Step Stop Rust System
Step 1: POR-15 Cleaner Degreaser (Formerly Marine Clean) removes grease, oil, dirt, and grime in one application without leaving residues, noxious fumes, or flammable solvents.
Step 2: POR-15 Metal Prep (Formerly Prep & Ready) provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including shiny polished metal surfaces.
Step 3: POR-15 Rust Preventive Coating is a high-tech, high-performance rust preventive coating designed for application directly on stable rust or seasoned metal surfaces. Provides permanent rust protection with a hammer-tough finish resistant to acids, alkalis, and repels all fuels and oils.
Step-by-step Restoration
Before: Heavily rusted diamond-plate pickup truck beds can be a problem, fix them permanently with the POR-15 3-Step System.
Step 1: Clean it! Remove loose rust and degrease the surface with a water-based Cleaner Degreaser
Step 2: Prep it! Neutralize rust and etch with Metal Prep.
Step 3: Coat it! After thorough washing and drying, coat with POR-15 Rust Preventive Coating, right onto the rust!
For areas exposed to U.V. light: Topcoat with Top Coat, 2K Urethane, or other top coat of your choice.
After: Now you have a PERMANENTLY repaired truck bed, that will NOT rust again.